Suitable for Area Upto 120 SQMTRS Intensity of Rainfall 5 mm/Hour to 75 mm/Hour Filter Type Open ended, Non-clog Working Principle Cohesive Force & Centrifugal Force Operating Pressure > 1 foot of Gravity Head (0.060kg/cm2) Max Discharge at (CWO) 120 Liters per minute Filter Element SS-304 Multi-Surface Screen - Food Grade Mesh Size 250 Microns Inlet Size 90 MM Clean Water Outlet size (CWO) 63 MM Drain Outlet size 90 MM Filter Housing UV Stabilized - HDPE Filter Efficiency Above 90%* Source of Power Gravity

Roof Top Rain Water Harvesting What is Roof Top Rain Water Harvesting? Rooftop Rain Water Harvesting is the technique through which rain water is captured from the roof catchments and stored in reservoirs. Harvested rain water can be stored in sub-surface ground water reservoir by adopting artificial recharge techniques to meet the household needs through storage in tanks. The Main Objective of rooftop rain water harvesting is to make water available for future use. Capturing and storing rain water for use is particularly important in dryland, hilly, urban and coastal areas. Advantages of Rain Water Harvesting 1. Provides self-sufficiency to your water supply 2. Reduces the cost for pumping of ground water 3. Provides high quality water, soft and low in minerals 4. Improves the quality of ground water through dilution when recharged to ground water 5. Reduces soil erosion in urban areas 6. The rooftop rain water harvesting is less expensive 7. Rainwater harvesting systems are simple which can be adopted by individuals 8. Rooftop rain water harvesting systems are easy to construct, operate and maintain 9. In hilly terrains, rain water harvesting is preferred 10. In saline or coastal areas, rain water provides good quality water and when recharged to ground water, it reduces salinity and also helps in maintaining balance between the fresh-saline water interface 11. In Islands, due to limited extent of fresh water aquifers, rain water harvesting is the most preferred source of water for domestic use 12. In desert, where rain fall is low, rain water harvesting has been providing relief to people

Water Conservation, Ground Water Rejuvenation and Development via Rainwater Management and Harvesting Rainwater through Ponds and Borewell Recharging Structures to Support Increasing Demand of Water for Daily usage for Domestic, Industrial and Agricultural purposes. Water Conservation and Harvesting Structures in Naturally Water Scarce Regions creates Geo-Hydrological Opportunity and Economic Viability. Ponds recharging structure, farm pond, stop Dam, and small pond etc. It is seen that different Geographical Location and unique Geophysical and Hydrological Nature and every situation needs to be addressed, separately, the groundwater recharge capacity of the varies regions may vary depending upon area specific geophysical nature of earth strata. Recharge Wells provide an opportunity to extract sub-surface flow of the region without exploiting the Groundwater reserve.

‘V’ Wire Injection Well Technology to Recharge Groundwater Source: • The Rain Water is lead through water channel and first reaches the silt trap, which allows for silt to accumulate in the chamber. The overflow water is lead into the injection well, passing through multilayer’s of Filtration media placed at the top of the injection well. The water is accommodated in a specially designed storage well, which creates water column, injecting large quantities of water into the deeper layers of the semi impervious earth’s strata through the Non Clogging V-Wire screens attached to the specifically designed percolator pipe, placed to a depth of 30 meters below the ground. The water column and the dual V-Wire Screen allow for the water to reach the dry joints, cracks, aquifers and recharge the ground water source. • This technology does not employ moving parts; the assured life span of the material is a minimum of twenty years. The maintenance cost involves desalting of the silt trap and replacement of filtration media once in five years. • The technology was adaptable to harvest rain water, irrespective of the presence of any bore well in place and also irrespective of terrain. The technology gave maximum flexibility to be used either in low lying areas or in upland conditions. • All materials used in this Technology are eco-friendly and recyclable. • Technology works on the Gravitational Principal Geomorphic profiling through vertical electrical Sounding of the soil strata is done to ascertain enormous quantity of water, quickly penetrating the rainwater into groundwater source. • The Provisioning of silt Trap fitted with Horizontal V wire Screen Filter eliminated the need of periodic maintenance and also facilitating significant volumes of rainwater to get into the recharging well.