rooftop rain water harvesting

Rainwater Harvesting Filters. FL 100 (Rooftop Area upto 1200 Sq. Ft) The characteristic features of FL Series Dual Intensity RWH Filter is its capacity to take up the load up to 10 to 110 square meters of Roof area with variable intensity of rainfall of 5 to 75 mm/ hour with a discharge capacity of 10 to 105 Liters per minute. This filter can be conveniently used for Harvesting Rainwater for Individual households, Schools, and Smaller Roof area Buildings. • Item Code: FL-100 Suitable up to area: 110 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 105 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 90 MM Clean Water Outlet: 63 MM Drain Outlet: 90 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

PENDING

Rooftop Harvesting Filters. FL 200/250 (Rooftop Area upto 2500 Sq.ft.) The characteristic features of FL Series Dual Intensity Rain Water Harvesting Filter is its capacity to take up the load up to 10 to 225 square meters of roof area with variable intensity of rainfall of 5 to 75 mm/hour with a discharge capacity of 10 to 225 liters per minute. This filter can be conveniently used for harvesting rainwater for individual households, schools, apartments, institutions, and commercial buildings of medium sizes. • Item Code: FL-200 Suitable up to area: 225 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 225 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 110 MM Clean Water Outlet: 75 MM Drain Outlet: 90 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

PENDING

“Rainy“ Rainwater Harvesting Filters Completely Indigenous and Patented Technology for Dual Intensity Rainwater Harvesting Filters called 'Rainy'. For groundwater recharging, our innovation uses an injection well equipped with “V-Wire Screens“ that enables replenishment of groundwater source. Rainwater is one of the purest source of water with less then 50mg/ litre of Total Dissolved Solids (TDS). Minimalistic, easy-to-install and easy to maintain Products. Reduction of Carbon Footprint and Recharge water source to avail clean water for consumption. Working Principle: When the rainwater along with dirt & debris flows by gravity through the downtake pipes, it enters into the filter and starts rotating in anticlockwise direction at the periphery of the upper housing, this enables it to flow into the SS-304 filter element placed in the lower housing in angular motion at specific speed & velocity, which creates cohesive force at low intensity & centrifugal force at high intensity of rainfall. In both situations, involving low & high intensity of rainfall, the working principle of the filter based on cohesive & centrifugal force respectively, aids the filter element to flush out dirt & debris automatically. The water then passes through the drain outlet and simultaneously diverts clean water into the sump/ recharging well through the clean water outlet, which can be used for reutilization or recharging of groundwater source. Special Features : What makes 'Rainy' unique? Dual Intensity Filters works on the principle of Cohesive & Centrifugal force. The open drain design does not allow stagnation of water and dirt particles. Works on Gravitation force (No external energy required). Cost effective and affordable. Compact in size and wall mounted. Inbuilt self-cleaning mechanism. Automatic flush out of dirt and debris. No consumables required. Flexibility in pipe connection to any angle. Tough UV stabilized high density polyethylene housing. Filter Element SS-304 Multi-Surface Screen food grade. All the material used are food grade and recyclable. Filter Pipe connections can be turned up to 360 Degrees allowing it to suit the given site conditions. Simple in connection, which any local plumber can easily install. The filter efficiency remains unchanged even with the variation of intensity of rainfall. The filters do not have any moving parts; there is no wear & tear of the filter allowing for long life span. Technology works on the Gravitational Principle so saves power (reduces the pumping of water from distant places & depths). Swirling movement of water is formed while ‘Rainy’ filters are under operation, this leads to aeration of water. Thus, increases the water quality. Dual Intensity Filters works on the principle of Cohesive & Centrifugal force. The open drain design does not allow stagnation of water and dirt particles. Works on Gravitation force (No external energy required). Cost effective and affordable. Compact in size and wall mounted. Inbuilt self-cleaning mechanism. Automatic flush out of dirt and debris. No consumables required. Flexibility in pipe connection to any angle. Tough UV stabilized high density polyethylene housing. Filter Element SS-304 Multi-Surface Screen food grade. All the material used are food grade and recyclable. Filter Pipe connections can be turned up to 360 Degrees allowing it to suit the given site conditions. Simple in connection, which any local plumber can easily install. The filter efficiency remains unchanged even with the variation of intensity of rainfall. The filters do not have any moving parts; there is no wear & tear of the filter allowing for long life span. Technology works on the Gravitational Principle so saves power (reduces the pumping of water from distant places & depths). Swirling movement of water is formed while ‘Rainy’ filters are under operation, this leads to aeration of water. Thus, increases the water quality.

PENDING

Rainy Rainwater Harvesting Filter. FL 300 (Rooftop Area upto 3600 sq.ft) The characteristic features of FL Series Dual Intensity Rain Water Harvesting Filter is its capacity to take up the load up to 10 to 350 square meters of roof area with variable intensity of rainfall of 5 to 75 mm/hour with a discharge capacity of 10 to 340 liters per minute. This filter can be conveniently used for harvesting rainwater for individual households, schools, apartments, institutions, hospitals and commercial buildings of medium and small sizes. • Item Code: FL-300 Suitable up to area: 350 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 340 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 110 MM Clean Water Outlet: 90 MM Drain Outlet: 90 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

PENDING

Roof Top Rain Water Harvesting What is Roof Top Rain Water Harvesting? Rooftop Rain Water Harvesting is the technique through which rain water is captured from the roof catchments and stored in reservoirs. Harvested rain water can be stored in sub-surface ground water reservoir by adopting artificial recharge techniques to meet the household needs through storage in tanks. The Main Objective of rooftop rain water harvesting is to make water available for future use. Capturing and storing rain water for use is particularly important in dryland, hilly, urban and coastal areas. In alluvial areas energy saving for 1m. rise in ground water level is around 0.40 kilo watt per hour. Need for Rooftop Rain Water Harvesting 1. To meet the ever increasing demand for water 2. To reduce the runoff which chokes storm drains 3. To avoid flooding of roads 4. To augment the ground water storage and control decline of water levels 5. To reduce ground water pollution 6. To improve the quality of ground water 7. To reduce the soil erosion 8. To supplement domestic water requirement during summer, drought etc. Advantages of Rain Water Harvesting 1. Provides self-sufficiency to your water supply 2. Reduces the cost for pumping of ground water 3. Provides high quality water, soft and low in minerals 4. Improves the quality of ground water through dilution when recharged to ground water 5. Reduces soil erosion in urban areas 6. The rooftop rain water harvesting is less expensive 7. Rainwater harvesting systems are simple which can be adopted by individuals 8. Rooftop rain water harvesting systems are easy to construct, operate and maintain 9. In hilly terrains, rain water harvesting is preferred 10. In saline or coastal areas, rain water provides good quality water and when recharged to ground water, it reduces salinity and also helps in maintaining balance between the fresh-saline water interface 11. In Islands, due to limited extent of fresh water aquifers, rain water harvesting is the most preferred source of water for domestic use 12. In desert, where rain fall is low, rain water harvesting has been providing relief to people

PENDING

Rooftop Rainwater Harvesting Filters. for Industries Use FL 500 (Rooftop Area 5000 Sq.ft.) The characteristic features of FL Series Dual Intensity Rain Water Harvesting Filter is its capacity to take up the load up to 10 to 500 square meters of roof area with variable intensity of rainfall of 5 to 75 mm/hour with a discharge capacity of 10 to 480 liters per minute. This filter can be conveniently used for harvesting rainwater for apartments, institutions, hospitals, commercial buildings, industries, corporate houses of medium and large sizes. • Item Code: FL-500 Suitable up to area: 500 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 480 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 110 MM Clean Water Outlet: 90 MM Drain Outlet: 110 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

PENDING

Suitable for Area Upto 1000 Sq Ft Intensity of Rainfall 5 mm/Hour to 75 mm/Hour Filter Type Open ended, Non-clog Working Principle Cohesive Force & Centrifugal Force Operating Pressure > 1 foot of Gravity Head (0.060kg/cm2) Max Discharge at (CWO) 120 Liters per minute Filter Element SS-304 Multi-Surface Screen - Food Grade Mesh Size 250 Microns Inlet Size 90 MM Clean Water Outlet size (CWO) 63 MM Drain Outlet size 90 MM Filter Housing UV Stabilized - HDPE Filter Efficiency Above 90%* Source of Power Gravity

PENDING

Percolation Pit It is a shallow excavated trench filled with gravel or crushed stone that is designed to infiltrate stormwater though permeable soils into the groundwater aquifer. A percolation trench is similar to a dry well, which is typically an excavated hole filled with gravel. we are engaged to offer the best Percolating Well Service. The provided service is executed using the progressive techniques under the supervision of our brilliant professionals. Offered service is highly demanded among our clients, owing to their various associated features like promptness and on time execution.

PENDING