Products

The all-welded wedge wire screens are made from two elements the V-shaped wedge wire is helically wound around an array of internal longitudinal support rods. Each intersection of wire and rods is automatically resistance welded, creating a very strong cage-like cylinder with one continuous slot spiraling along its full length. The gap between the wires, also called slot or aperture, is manufactured to customer specification, allows water to flow from the surrounding aquifer into the screen, The slots can be very narrow to keep out fine sand grains, which could otherwise damage your pump through abrasion. NON PLUGGING SLOTS V-shaped wire creating, two point particle contact preventing plugging. Inwardly opening slots (in-flow) preventing sand particles from remaining lodged in screen. The V-shaped wire enhances well efficiency, ensures consistent pumping and long well life. LARGE OPEN AREA The continuous slot wedge wire offers higher open area than any other type of screens used for water well applications, such as slotted pipe, punched pipe, louver screens. Wedge wires for each application are selected to maximize open area, resulting in the lowest possible cost for water extraction. TECHNICAL DETAILS Available sizes from 1“ (25 mm) to 22“ (560 mm) Water well screens designed to suit well depth Available in slots sizes from 0.15 mm to 3 mm Length up to 6 metres available Materials: LCG (Low Carbon Galvanised) / SS304 / S316L / SS316 / SS316L - or as required to meet Customer requirements. End fittings - to suit Customer requirements

PENDING

Borewell Drilling Services for Industries, Factories, Schools, Colleges, Universities, Buildings, Flats, Hotels, etc. The direct rotary drilling method was developed to increase drilling speeds and reach greater depths in most formations. The borehole is drilled by rotating a bit, and cuttings are removed by continuous circulation of the drilling fluid as a bit penetrates the formation.

PENDING

An observation well means a non-pumping, non-potable well used for measuring groundwater levels or potentiometric surface. Observation wells can be used to show that a well is obtaining water from an isolated aquifer, or perhaps that the aquifer is connected to other aquifers or surface water. Piezometers are excellent for capturing water flow, strata permeability, and depth of water pressure.

PENDING

V -WIRE FILTER SCREEN V-Wire Filter Screen/ Rainwater Filters are the best Rainwater Harvesting Filters which are used for Filtration purpose. These filters have Continuous slots, which are Non Choking & Non Clogging and makes Filtration process smooth. There is no wastage of rain water after using this RWH filter. V -WIRE SCREENS is a Proven Product of Proven Technology Trusted Widely for RAINWATER HARVESTING. we are proud to Offer one of the Most Modern Filtration Systems for Rainwater Harvesting (Absolutely Zero Maintenance Cost) with the sole aim of increasing awareness about the Long Term benefits of Rainwater Harvesting using Filter Screens instead of the Conventional Method normally adopted. V-Wire Screen Filter“/ Rainwater Harvesting Filter Screen is a Highly Acceptable Modern Technology in Rain Water Harvesting. It eliminates conventional filtration system, SAVES -Precious Space, Construction Cost and Construction Time for Filtration Tank. Scientific Design helps Cleaning Very Easy and SAVES Maintenance Cost.

PENDING

AWM MAG-110 - Smart Series EM Flowmeter Allegiance Electromagnetic Flow Meter, simply known as mag flow meter is a volumetric flow meter that is ideally used for water, mild acid or alkali, salt solution, pulp, wastewater (ETP, STP, WTP & WWTP) and other conductive media that experience low pressure drop. However, the medium must not contain enormous ferromagnetic materials and bubbles. It is widely used in the flow measurement of metallurgy, papermaking, environmental protection, petroleum, light textile, chemical industry, pharmaceutical industry, water conservation, municipal construction, food industry and other fields. A mag meter operates on Faraday’s Law of Electromagnetic Induction which states that a voltage is induced when a conductor moves through a magnetic field. The liquid flowing through the pipe acts as the conductor and this induces a voltage which is proportional to the average flow velocity. This voltage is detected by sensing electrodes mounted in the Magflow meter body and sent to a transmitter which calculates the volumetric flow rate based on the pipe dimensions. Allegiance Digital Flow Meter With Telemetry is manufactured as per CGWA Compliance and provides effortlessly smooth performance. Unlike traditional flowmeters, the main meter sensor is designed to have no moving parts that eliminates frequent maintenance.

PENDING

Injection well Technology is the most effective in capturing surface run off both from plain open loose area or from storm line and filtering in two stages by filtering rainwater through 4 stages of filtration through Silt Trap and Injection well. The silt traps takes care of most impurities in the first stage itself, as it has 40 mm gravels, 10 mm pebbles, charcoal, activated carbon and coarse send and horizontally fixed V wire non clogging SS screen of 500 mm length and 150 mm dia. Rainwater then flows through main Injection well where it flows by gravity through 40 mm gravels, 10 mm pebbles, charcoal, activated carbon and coarse send and vertically placed V wire non clogging SS screen of 500 mm length and 200 mm dia. on the recharge bore well. Air vent from bore well and main well is kept at center. The main well is designed to do maintenance whenever is required. As such the filtration media only needs cleaning once in a year Silt Trap and Injection well. The best technology to have head pressure by the way of water column to ensure fast recharge of ground water and recover the water levels in Aquifer. Allegiance water Management; India's passionate Rainwater Company.

PENDING

The concept of watershed development is based on the idea that rainwater can be harvested, the direct run-off of water reduced and the groundwater recharged. Watershed management has been a comprehensive approach aimed at optimizing the use of water, land and vegetation in any area. It is highly effective in channelizing water availability that helps to alleviate drought, moderate floods, prevent soil erosion, increase fuel, fodder and agricultural production on a sustained basis while keeping the inherent productivity of the soil resource intact.

PENDING

Allegiance Water Level Indicator Flat tape water level Indicator Enhanced Laser Marked Tape Features Durable PVDF non-stretch tape Improved electrical properties Thicker dog bone design prevents clinging to sides of the well Permanently laser marked every 1/100 ft or each mm The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 5000 ft (1500 m). New flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. The P7 Water Level Meter Probe is engineered to allow submersion to 1000 ft. (300 m). Sensor at the tip of the probe provides

PENDING

Water well Drilling Machine, Water well DTH drilling machines & Drilling Rig Machine Water Well Drilling Services water well drilling services throughout India. The company owns 25 water well drill rigs with a capacity to bore 30 meters to 300 meters deploying compressor of 1500 cfm/400 psi. Chiefly utilized for water well drilling, our rig fleet allows customization based on client requirements. Recharge Well Drilling Services. Methods and techniques for ground water recharge. Types of Soil tests for building construction works depend on properties of soil. Design of the foundation is based on soil test report of construction site. Soil tests for construction of buildings or any structure is the first step in construction planning to understand the suitability of soil for proposed construction work. Soil which is responsible for allowing the stresses coming from the structure should be well tested to give excellent performance. If soil shouldn’t tested correctly then the whole building or structure is damaged or collapsed or leaned like leaning tower of Pisa. So, soil inspection or testing is the first step to proceed any construction Allegiance Water Management www.allegianceindia.in Email : info.allegianceentp@gmail.com Contact : 8690924755 ; 9408425896

PENDING

It is a shallow excavated trench filled with gravel or crushed stone that is designed to infiltrate stormwater though permeable soils into the groundwater aquifer. A percolation trench is similar to a dry well, which is typically an excavated hole filled with gravel. we are engaged to offer the best Percolating Well Service. The provided service is executed using the progressive techniques under the supervision of our brilliant professionals. Offered service is highly demanded among our clients, owing to their various associated features like promptness and on time execution.

PENDING

Suitable for Area Upto 1000 Sq Ft Intensity of Rainfall 5 mm/Hour to 75 mm/Hour Filter Type Open ended, Non-clog Working Principle Cohesive Force & Centrifugal Force Operating Pressure > 1 foot of Gravity Head (0.060kg/cm2) Max Discharge at (CWO) 120 Liters per minute Filter Element SS-304 Multi-Surface Screen - Food Grade Mesh Size 250 Microns Inlet Size 90 MM Clean Water Outlet size (CWO) 63 MM Drain Outlet size 90 MM Filter Housing UV Stabilized - HDPE Filter Efficiency Above 90%* Source of Power Gravity

PENDING

Water audit is a systematic process of objectively obtaining a water balance by measuring flow of water from the site of water withdrawal or treatment, through the distribution system, and into areas where it is used and finally discharged. Conducting a water audit involves calculating water balance, water use and identifying ways for saving water. Water audit involves preliminary water survey and detailed water audit. Preliminary water survey is conducted to collect background information regarding plant activities, water consumption and water discharge pattern and water billing, rates and water cess. After the analysis of the secondary data collected from the industry, detailed water audit is conducted, which involves the following steps:  On site training and discussion with facility manager and personnel  Water system analysis  Quantification of baseline water map  Monitoring and measurements using pressure and flow meters and various other devices  Quantification of inefficiencies and leaks  Quantification of water quality loads and discharges  Quantification of variability in flows and quality parameters  Strategies for water treatment and reuse or direct use A detailed water balance is finally developed. Water quality requirement at various user areas is mapped, which helps in developing „recycle‟ and „reuse‟ opportunities. The detailed water audit report contains the following:  Water consumption and wastewater generation pattern  Specific water use and conservation  Complete water balance of the facility  Water saving opportunities  Method of implementing the proposals  Full description and figures  Investment required Industries can undertake following measures for water conservation:  Setting up of norms for water budgeting  Modernization of industrial process to reduce water consumption  Recycling water with a re-circulating cooling system  Ozonation cooling water approach which can result in five fold reduction in blow down when compared to traditional chemical treatment  Reduction in reuse of de-ionized water by eliminating some plenum flushes, converting from a continuous flow to an intermittent flow system and improving control on the use  Use of wastewater for use of gardening  Proper processing of effluents to adhere to the norms of disposal.

PENDING