'runoff features'

Roof Top Rain Water Harvesting What is Roof Top Rain Water Harvesting? Rooftop Rain Water Harvesting is the technique through which rain water is captured from the roof catchments and stored in reservoirs. Harvested rain water can be stored in sub-surface ground water reservoir by adopting artificial recharge techniques to meet the household needs through storage in tanks. The Main Objective of rooftop rain water harvesting is to make water available for future use. Capturing and storing rain water for use is particularly important in dryland, hilly, urban and coastal areas. In alluvial areas energy saving for 1m. rise in ground water level is around 0.40 kilo watt per hour. Need for Rooftop Rain Water Harvesting 1. To meet the ever increasing demand for water 2. To reduce the runoff which chokes storm drains 3. To avoid flooding of roads 4. To augment the ground water storage and control decline of water levels 5. To reduce ground water pollution 6. To improve the quality of ground water 7. To reduce the soil erosion 8. To supplement domestic water requirement during summer, drought etc. Advantages of Rain Water Harvesting 1. Provides self-sufficiency to your water supply 2. Reduces the cost for pumping of ground water 3. Provides high quality water, soft and low in minerals 4. Improves the quality of ground water through dilution when recharged to ground water 5. Reduces soil erosion in urban areas 6. The rooftop rain water harvesting is less expensive 7. Rainwater harvesting systems are simple which can be adopted by individuals 8. Rooftop rain water harvesting systems are easy to construct, operate and maintain 9. In hilly terrains, rain water harvesting is preferred 10. In saline or coastal areas, rain water provides good quality water and when recharged to ground water, it reduces salinity and also helps in maintaining balance between the fresh-saline water interface 11. In Islands, due to limited extent of fresh water aquifers, rain water harvesting is the most preferred source of water for domestic use 12. In desert, where rain fall is low, rain water harvesting has been providing relief to people

It is a shallow excavated trench filled with gravel or crushed stone that is designed to infiltrate stormwater though permeable soils into the groundwater aquifer. A percolation trench is similar to a dry well, which is typically an excavated hole filled with gravel. we are engaged to offer the best Percolating Well Service. The provided service is executed using the progressive techniques under the supervision of our brilliant professionals. Offered service is highly demanded among our clients, owing to their various associated features like promptness and on time execution.

Percolation well is Known as Rain Water Harvesting System It is a shallow excavated trench filled with gravel or crushed stone that is designed to infiltrate stormwater though permeable soils into the groundwater aquifer. A percolation trench is similar to a dry well, which is typically an excavated hole filled with gravel. we are engaged to offer the best Percolating Well Service. The provided service is executed using the progressive techniques under the supervision of our brilliant professionals. Offered service is highly demanded among our clients, owing to their various associated features like promptness and on time execution.

Allegiance Water Level Indicator Flat tape water level Indicator Enhanced Laser Marked Tape Features Durable PVDF non-stretch tape Improved electrical properties Thicker dog bone design prevents clinging to sides of the well Permanently laser marked every 1/100 ft or each mm The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 5000 ft (1500 m). New flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. The P7 Water Level Meter Probe is engineered to allow submersion to 1000 ft. (300 m). Sensor at the tip of the probe provides

Digital Water Level Recorder (DWLR) with Telemetry which can be used in piezometer wells for measurement of water level data. Devices in Water level measurement are the next-generation products in the water sector. Ideal solution for *Real-time measurement of fluctuations in water table *Central Ground Water Board(CGWB) NOC compliances *Determining efficiency of rain water harvesting systems *Planning crops and drought forecasting in agriculture Data communications GPRS/GSM Data visualization - Graphs & list view of data collected - Analytical tools for trend analysis - Location of wells on Google maps User configurable features - Roles and accessibility - Frequency setup* - Remote triggering* Data download options - CSV and xlsx format - Reports

Rainwater Harvesting Filters. FL 100 (Rooftop Area upto 1200 Sq. Ft) The characteristic features of FL Series Dual Intensity RWH Filter is its capacity to take up the load up to 10 to 110 square meters of Roof area with variable intensity of rainfall of 5 to 75 mm/ hour with a discharge capacity of 10 to 105 Liters per minute. This filter can be conveniently used for Harvesting Rainwater for Individual households, Schools, and Smaller Roof area Buildings. • Item Code: FL-100 Suitable up to area: 110 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 105 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 90 MM Clean Water Outlet: 63 MM Drain Outlet: 90 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

Rooftop Harvesting Filters. FL 200/250 (Rooftop Area upto 2500 Sq.ft.) The characteristic features of FL Series Dual Intensity Rain Water Harvesting Filter is its capacity to take up the load up to 10 to 225 square meters of roof area with variable intensity of rainfall of 5 to 75 mm/hour with a discharge capacity of 10 to 225 liters per minute. This filter can be conveniently used for harvesting rainwater for individual households, schools, apartments, institutions, and commercial buildings of medium sizes. • Item Code: FL-200 Suitable up to area: 225 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 225 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 110 MM Clean Water Outlet: 75 MM Drain Outlet: 90 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

Rooftop Rainwater Harvesting Filters. for Industries Use FL 500 (Rooftop Area 5000 Sq.ft.) The characteristic features of FL Series Dual Intensity Rain Water Harvesting Filter is its capacity to take up the load up to 10 to 500 square meters of roof area with variable intensity of rainfall of 5 to 75 mm/hour with a discharge capacity of 10 to 480 liters per minute. This filter can be conveniently used for harvesting rainwater for apartments, institutions, hospitals, commercial buildings, industries, corporate houses of medium and large sizes. • Item Code: FL-500 Suitable up to area: 500 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 480 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 110 MM Clean Water Outlet: 90 MM Drain Outlet: 110 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

Vortex Flow Meter – High-Precision Flow Measurement for Steam, Gas & Liquids Buy Vortex Flow Meter Online | Industrial Flow Monitoring The Vortex Flow Meter is a high-accuracy, maintenance-free flow measurement device designed for steam, gas, air, and liquid applications. Using advanced vortex shedding technology, it ensures precise, stable, and reliable flow measurement with no moving parts, reducing wear and maintenance costs. Why Choose This Vortex Flow Meter? ✅ No Moving Parts – Ensures long-lasting performance with minimal maintenance. ✅ High-Accuracy & Stability – Digital signal processing provides precise flow readings. ✅ Wide Application Compatibility – Suitable for steam, gases, air, and liquids. ✅ Real-Time LCD Display – Monitors instantaneous & totalized flow, temperature, and pressure. ✅ Smart Output & Connectivity – Features 4-20mA output and pulse signal for seamless integration. ✅ Temperature & Pressure Compensation – Ideal for industrial steam and gas flow measurement. Vortex Flow Meter Specifications 📌 Power Supply: 12-32V DC 📌 Output Signal: 4-20mA (Standard), Pulse Output 📌 Process Temperature: Up to 250°C (For higher temperatures, consult factory) 📌 Alarm System: Low alarm (3.8mA) & high alarm (22.0mA) 📌 K-Factor Correction: 2 to 5 Points calibration 📌 Display: Multi-line LCD with real-time monitoring 📌 Compensation: Pressure & temperature compensation for steam and gas applications 📌 Application Scope: Industrial Steam, Gas, Air, and Liquid Flow Measurement Industries & Applications 🔹 Power Plants & Boilers – Steam flow measurement for energy efficiency. 🔹 Oil & Gas Industry – Monitoring gas flow with real-time compensation. 🔹 HVAC & Compressed Air Systems – Ensures accurate airflow control. 🔹 Chemical & Pharmaceutical Processing – Precise liquid and gas measurement. Why Choose This Flow Meter? 🔹 ISO & CE Certified Quality 🔹 High-Precision Flow Monitoring with Digital Control 🔹 Best Prices for Industrial Flow Meters 💡 Upgrade to the Vortex Flow Meter for precise & efficient flow measurement! 📞 Contact Us for Orders & Bulk Pricing