'roof material'

Roof Top Rain Water Harvesting What is Roof Top Rain Water Harvesting? Rooftop Rain Water Harvesting is the technique through which rain water is captured from the roof catchments and stored in reservoirs. Harvested rain water can be stored in sub-surface ground water reservoir by adopting artificial recharge techniques to meet the household needs through storage in tanks. The Main Objective of rooftop rain water harvesting is to make water available for future use. Capturing and storing rain water for use is particularly important in dryland, hilly, urban and coastal areas. In alluvial areas energy saving for 1m. rise in ground water level is around 0.40 kilo watt per hour. Need for Rooftop Rain Water Harvesting 1. To meet the ever increasing demand for water 2. To reduce the runoff which chokes storm drains 3. To avoid flooding of roads 4. To augment the ground water storage and control decline of water levels 5. To reduce ground water pollution 6. To improve the quality of ground water 7. To reduce the soil erosion 8. To supplement domestic water requirement during summer, drought etc. Advantages of Rain Water Harvesting 1. Provides self-sufficiency to your water supply 2. Reduces the cost for pumping of ground water 3. Provides high quality water, soft and low in minerals 4. Improves the quality of ground water through dilution when recharged to ground water 5. Reduces soil erosion in urban areas 6. The rooftop rain water harvesting is less expensive 7. Rainwater harvesting systems are simple which can be adopted by individuals 8. Rooftop rain water harvesting systems are easy to construct, operate and maintain 9. In hilly terrains, rain water harvesting is preferred 10. In saline or coastal areas, rain water provides good quality water and when recharged to ground water, it reduces salinity and also helps in maintaining balance between the fresh-saline water interface 11. In Islands, due to limited extent of fresh water aquifers, rain water harvesting is the most preferred source of water for domestic use 12. In desert, where rain fall is low, rain water harvesting has been providing relief to people

Rainy Rainwater Harvesting Filter. FL 300 (Rooftop Area upto 3600 sq.ft) The characteristic features of FL Series Dual Intensity Rain Water Harvesting Filter is its capacity to take up the load up to 10 to 350 square meters of roof area with variable intensity of rainfall of 5 to 75 mm/hour with a discharge capacity of 10 to 340 liters per minute. This filter can be conveniently used for harvesting rainwater for individual households, schools, apartments, institutions, hospitals and commercial buildings of medium and small sizes. • Item Code: FL-300 Suitable up to area: 350 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 340 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 110 MM Clean Water Outlet: 90 MM Drain Outlet: 90 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

‘V’ Wire Injection Well Technology to Recharge Groundwater Source: • The Rain Water is lead through water channel and first reaches the silt trap, which allows for silt to accumulate in the chamber. The overflow water is lead into the injection well, passing through multilayer’s of Filtration media placed at the top of the injection well. The water is accommodated in a specially designed storage well, which creates water column, injecting large quantities of water into the deeper layers of the semi impervious earth’s strata through the Non Clogging V-Wire screens attached to the specifically designed percolator pipe, placed to a depth of 30 meters below the ground. The water column and the dual V-Wire Screen allow for the water to reach the dry joints, cracks, aquifers and recharge the ground water source. • This technology does not employ moving parts; the assured life span of the material is a minimum of twenty years. The maintenance cost involves desalting of the silt trap and replacement of filtration media once in five years. • The technology was adaptable to harvest rain water, irrespective of the presence of any bore well in place and also irrespective of terrain. The technology gave maximum flexibility to be used either in low lying areas or in upland conditions. • All materials used in this Technology are eco-friendly and recyclable. • Technology works on the Gravitational Principal Geomorphic profiling through vertical electrical Sounding of the soil strata is done to ascertain enormous quantity of water, quickly penetrating the rainwater into groundwater source. • The Provisioning of silt Trap fitted with Horizontal V wire Screen Filter eliminated the need of periodic maintenance and also facilitating significant volumes of rainwater to get into the recharging well.

The all-welded wedge wire screens are made from two elements the V-shaped wedge wire is helically wound around an array of internal longitudinal support rods. Each intersection of wire and rods is automatically resistance welded, creating a very strong cage-like cylinder with one continuous slot spiraling along its full length. The gap between the wires, also called slot or aperture, is manufactured to customer specification, allows water to flow from the surrounding aquifer into the screen, The slots can be very narrow to keep out fine sand grains, which could otherwise damage your pump through abrasion. NON PLUGGING SLOTS V-shaped wire creating, two point particle contact preventing plugging. Inwardly opening slots (in-flow) preventing sand particles from remaining lodged in screen. The V-shaped wire enhances well efficiency, ensures consistent pumping and long well life. LARGE OPEN AREA The continuous slot wedge wire offers higher open area than any other type of screens used for water well applications, such as slotted pipe, punched pipe, louver screens. Wedge wires for each application are selected to maximize open area, resulting in the lowest possible cost for water extraction. TECHNICAL DETAILS Available sizes from 1“ (25 mm) to 22“ (560 mm) Water well screens designed to suit well depth Available in slots sizes from 0.15 mm to 3 mm Length up to 6 metres available Materials: LCG (Low Carbon Galvanised) / SS304 / S316L / SS316 / SS316L - or as required to meet Customer requirements. End fittings - to suit Customer requirements

Rainwater Harvesting Filters. FL 100 (Rooftop Area upto 1200 Sq. Ft) The characteristic features of FL Series Dual Intensity RWH Filter is its capacity to take up the load up to 10 to 110 square meters of Roof area with variable intensity of rainfall of 5 to 75 mm/ hour with a discharge capacity of 10 to 105 Liters per minute. This filter can be conveniently used for Harvesting Rainwater for Individual households, Schools, and Smaller Roof area Buildings. • Item Code: FL-100 Suitable up to area: 110 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 105 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 90 MM Clean Water Outlet: 63 MM Drain Outlet: 90 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

Rooftop Harvesting Filters. FL 200/250 (Rooftop Area upto 2500 Sq.ft.) The characteristic features of FL Series Dual Intensity Rain Water Harvesting Filter is its capacity to take up the load up to 10 to 225 square meters of roof area with variable intensity of rainfall of 5 to 75 mm/hour with a discharge capacity of 10 to 225 liters per minute. This filter can be conveniently used for harvesting rainwater for individual households, schools, apartments, institutions, and commercial buildings of medium sizes. • Item Code: FL-200 Suitable up to area: 225 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 225 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 110 MM Clean Water Outlet: 75 MM Drain Outlet: 90 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

Rooftop Rainwater Harvesting Filters. for Industries Use FL 500 (Rooftop Area 5000 Sq.ft.) The characteristic features of FL Series Dual Intensity Rain Water Harvesting Filter is its capacity to take up the load up to 10 to 500 square meters of roof area with variable intensity of rainfall of 5 to 75 mm/hour with a discharge capacity of 10 to 480 liters per minute. This filter can be conveniently used for harvesting rainwater for apartments, institutions, hospitals, commercial buildings, industries, corporate houses of medium and large sizes. • Item Code: FL-500 Suitable up to area: 500 SQMTRS Max: Intensity of Rainfall: 75 mm/hr Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 480 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 110 MM Clean Water Outlet: 90 MM Drain Outlet: 110 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity

Suitable for Area Upto 1000 Sq Ft Intensity of Rainfall 5 mm/Hour to 75 mm/Hour Filter Type Open ended, Non-clog Working Principle Cohesive Force & Centrifugal Force Operating Pressure > 1 foot of Gravity Head (0.060kg/cm2) Max Discharge at (CWO) 120 Liters per minute Filter Element SS-304 Multi-Surface Screen - Food Grade Mesh Size 250 Microns Inlet Size 90 MM Clean Water Outlet size (CWO) 63 MM Drain Outlet size 90 MM Filter Housing UV Stabilized - HDPE Filter Efficiency Above 90%* Source of Power Gravity

AWM MAG-110 - Smart Series EM Flowmeter Allegiance Electromagnetic Flow Meter, simply known as mag flow meter is a volumetric flow meter that is ideally used for water, mild acid or alkali, salt solution, pulp, wastewater (ETP, STP, WTP & WWTP) and other conductive media that experience low pressure drop. However, the medium must not contain enormous ferromagnetic materials and bubbles. It is widely used in the flow measurement of metallurgy, papermaking, environmental protection, petroleum, light textile, chemical industry, pharmaceutical industry, water conservation, municipal construction, food industry and other fields. A mag meter operates on Faraday’s Law of Electromagnetic Induction which states that a voltage is induced when a conductor moves through a magnetic field. The liquid flowing through the pipe acts as the conductor and this induces a voltage which is proportional to the average flow velocity. This voltage is detected by sensing electrodes mounted in the Magflow meter body and sent to a transmitter which calculates the volumetric flow rate based on the pipe dimensions. Allegiance Digital Flow Meter With Telemetry is manufactured as per CGWA Compliance and provides effortlessly smooth performance. Unlike traditional flowmeters, the main meter sensor is designed to have no moving parts that eliminates frequent maintenance.